Properties
If dustproofing, higher abrasion resistance and highest stain-proofing properties are desired for the flooring, OBTEGO R-30 and OBTEGO R-400 is the right system for you. The system also causes a deepening of the hue in most cases and increases the gloss.
Application
OBTEGO R-30 and OBTEGO R-400 is mainly used on wing-smoothed concrete floors. Further fields of application are cement terrazzo or calcareous natural stone. The solidifying effect of OBTEGO R-30 makes it highly recommended to use on less solid ground surfaces. Although OBTEGO R-30 and OBTEGO R-400 is mainly used indoors, it can also be used outdoors.
Refurbishment
On old, dirty surfaces, the surface must be prepared by diamond grinding technology to restore a clean and absorbent surface. In some cases a basic cleaning with OBTEGO C-10 is sufficient. Depending on the floor and the object, the wiping care OBTEGO C-200 or OBTEGO C-205 (industrial) can be used for further care.
Note for professionals
The use is only possible on purely cementitious floor surfaces. OBTEGO R-30 and OBTEGO R-400 can not be used or can only be used to a limited extent on polymer-modified surfaces. On wing-smoothed surfaces, a diamond grinding technique is recommended (e.g., grain 100-200).